Introduction
In this guide, I will walk you through the process of changing the internal battery in a Dodge Grand Caravan key fob. This key fob has been in use since 2008 up to the present day, and it requires a CR2032 battery to function properly.
You can easily purchase this battery online. I have included a link to buy it on Amazon for just a few dollars. The only other tool you will need is a flathead screwdriver.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Materials Needed
- CR2032 battery
- Flathead screwdriver
Step-by-Step Guide
Step 1: Locate the Indentation
First, look at your key fob near the key ring. You will see a small indentation in the plastic where the seam meets. This is the spot where you will insert your flathead screwdriver.
Step 2: Insert the Screwdriver
Take your flathead screwdriver and find that corner. Push in until it sticks in place. Once it’s secure, gently twist the screwdriver until you feel a small click. This means the key fob is starting to come apart.
Step 3: Open the Key Fob
After you feel the click, you will see the key fob beginning to open. Continue to twist the screwdriver down the seam, working your way down until the top part comes off completely. Set this piece aside.
Step 4: Remove the Buttons
Carefully lift the rubber buttons up off the key fob and set them aside. This will expose the battery inside.
Step 5: Remove the Old Battery
Using your fingernail or the flathead screwdriver, carefully lift the old battery out of its slot. Dispose of the old battery properly.
Step 6: Insert the New Battery
Take your new CR2032 battery, ensuring the positive side faces down. Click it into place in the battery slot.
Step 7: Reassemble the Key Fob
Place the rubber buttons back on top of the new battery. Then, take the top part of the key fob that you set aside earlier and click it back into place. Ensure everything is secure and snaps together correctly.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
And there you have it! You have successfully replaced the battery in your Dodge Grand Caravan key fob. This simple process can save you time and money, ensuring your key fob is always ready to use.
If you found this guide helpful, feel free to leave a like or comment. For more information on changing the batteries for any of your key fobs from any make or model, check out our other guides or visit us at fobbattery.com. Thank you for reading!
FAQ
What type of battery does the Dodge Grand Caravan key fob use?
The key fob uses a CR2032 battery.
Where can I purchase a CR2032 battery?
You can purchase a CR2032 battery online. I recommend buying it from Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
What tools do I need to replace the battery?
You will need a flathead screwdriver and the new CR2032 battery.
How long does it take to replace the battery?
The entire process should take no more than a few minutes.
Is it difficult to replace the battery?
No, the process is straightforward and can be done by anyone.
Can I use any flathead screwdriver?
Yes, any flathead screwdriver you have at home will work.
What should I do with the old battery?
Dispose of the old battery properly according to your local regulations.
How often should I replace the key fob battery?
It depends on usage, but generally, you should replace it every 1-2 years.