Introduction
Replacing the battery in your Chrysler 200 key fob is a simple task that can save you time and money. Many people assume that changing the battery in their key fob is a complicated process that requires a visit to the dealership. However, with a few simple steps, you can easily replace the battery yourself.
In this guide, I will walk you through the process of changing the internal battery in a Chrysler 200 key fob. This key fob was used in Chrysler 200 models from 2015 to 2017. The only tool you will need is a flathead screwdriver or a coin, and a new CR2032 battery.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Materials Needed
- Flathead screwdriver or coin
- CR2032 battery
Step-by-Step Guide
Step 1: Remove the Internal Key
First, flip the key fob over. You will see a lever that holds the internal key in place. Press on that lever and pull the key out. This will reveal the keyhole and a small slot next to it.
Step 2: Open the Key Fob
Take a flathead screwdriver or a coin and insert it into the slot next to the keyhole. Apply some pressure and twist gently. This will begin to open the key fob. Continue twisting and gently working your way down until the key fob comes apart.
Step 3: Remove the Old Battery
Once the key fob is open, you will see the old battery. Use the same tool to gently lift the battery out from the side. The battery will come out easily.
Step 4: Insert the New Battery
Take the new CR2032 battery and make sure the positive side is facing down. Position the battery in the slot and click it into place.
Step 5: Reattach the Key Fob
Now, reattach the two parts of the key fob. Make sure to push them together until you don’t see any space between the two halves where the seam is.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tips and Warnings
- Be gentle when opening the key fob to avoid damage.
- Ensure the new battery is positioned correctly.
- Dispose of the old battery properly.
FAQ
What type of battery does the Chrysler 200 key fob use?
The Chrysler 200 key fob uses a CR2032 battery.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery online or at most electronic stores.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
How often should I replace the battery in my key fob?
The battery in your key fob typically lasts 2-3 years. If you notice the range of your key fob decreasing or if it stops working altogether, it is time to replace the battery.
Can I use any other type of battery?
It is recommended to use a CR2032 battery as it is specifically designed for this key fob. Using a different type of battery may not work or could damage the key fob.
Do I need to reprogram my key fob after changing the battery?
No, you do not need to reprogram your key fob after changing the battery. The key fob will continue to work as normal.
Conclusion
Replacing the battery in your Chrysler 200 key fob is a straightforward process that can be done in just a few minutes. By following these simple steps, you can save yourself the hassle and cost of going to a dealership.
If you found this guide helpful, please leave a comment and let us know. For more information on changing the batteries for key fobs for any make or model, check out our other guides or visit fobbattery.com.
Thank you for reading!