How to Replace the Battery in a Ford Fiesta Remote Key Fob (2015-2019)

Introduction

Replacing the battery in your Ford Fiesta remote key fob is an easy task that can save you time and money. The Ford Fiesta models from 2015 to 2019 use a CR2032 coin battery. This guide will walk you through the process step-by-step.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

Before you begin, gather the necessary tools and materials. You’ll need:

  • CR2032 coin battery
  • Flathead screwdriver or another key

You can purchase the CR2032 coin battery from Amazon.

Step 1: Locate the Notch

The first step is to locate the notch on your key fob. This notch is crucial for prying the key fob open. Hold the key fob so that the buttons are facing up and look for a small notch near the upper right corner.

Step 2: Pry Open the Key Fob

Using a flathead screwdriver or another key, insert it into the notch. Apply gentle pressure and twist to pry the two halves of the key fob apart. This may require some force, but be careful not to damage the key fob.

Step 3: Remove the Back Cover

Once the key fob is open, you will see the battery compartment. There may be a small rubber backing covering the battery. Remove this backing to access the battery.

Step 4: Replace the Battery

Take out the old CR2032 coin battery and replace it with a new one. Ensure that the positive side (the side with the lettering) is facing up.

Step 5: Reassemble the Key Fob

After inserting the new battery, replace the rubber backing if it was removed. Snap the two halves of the key fob back together. Make sure everything fits snugly and securely.

Step 6: Test the Key Fob

Finally, test your key fob to ensure that it’s working correctly. Press a few buttons to check if the battery replacement was successful.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

FAQs

What type of battery does the Ford Fiesta key fob use?

The Ford Fiesta key fob uses a CR2032 coin battery.

How often do I need to replace the battery in my key fob?

The battery life can vary, but it generally lasts between 1-2 years depending on usage.

What if my key fob still doesn’t work after replacing the battery?

If your key fob still doesn’t work, check for any damage or corrosion in the battery compartment. If the issue persists, you may need to contact a professional for further assistance.

Can I use a different type of battery?

No, it is recommended to use only a CR2032 coin battery for the Ford Fiesta key fob.

Do I need any special tools to replace the battery?

No special tools are required. A flathead screwdriver or another key will suffice.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery from Amazon or other electronic stores.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

Replacing the battery in your Ford Fiesta remote key fob is a simple process that can be done in a few minutes. By following this guide, you can ensure that your key fob remains functional and reliable. Remember to use a CR2032 coin battery and handle the key fob carefully to avoid any damage.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.