How to Replace the Battery in a Ford Taurus Key Fob

Introduction

Replacing the battery in a Ford Taurus key fob is a straightforward process. This guide will help you through each step to ensure your key fob is up and running smoothly. The Ford Taurus key fob, used from 2013 to the present, requires a CR2032 coin battery.

Let’s dive into the process of replacing the battery and ensure your key fob functions perfectly.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools You Will Need

Before starting, gather the necessary tools. These tools will help you open the key fob and replace the battery efficiently.

  • Internal valet key
  • Small flat-head screwdriver
  • New CR2032 coin battery

Step-by-Step Guide

Follow these steps to replace the battery in your Ford Taurus key fob:

Removing the Valet Key

To begin, flip the key fob over. You will notice a small latch on the back. Pull this latch down to release the internal valet key. Remove the valet key and set it aside.

Separating the Key Fob

Next, you need to separate the backing from the main part of the fob. Look for the line that goes around the fob. This line indicates where the backing separates from the main part.

Insert the valet key back into its slot, but only partially. Use it to get some leverage and create a small gap between the backing and the main part of the fob. Once you have a small gap, use a small flat-head screwdriver to widen the gap. Be careful not to damage the fob.

Opening the Key Fob

Once you have a sufficient gap, hold the main part of the fob and pull off the backing. It may require a bit of jiggling, but it will come off without breaking. Now, you have access to the battery compartment.

Removing the Old Battery

Inside the fob, you will see the CR2032 coin battery. Ensure the metal part holding the battery stays in place. Carefully pop out the old battery using the flat-head screwdriver.

Inserting the New Battery

Take your new CR2032 coin battery. The positive side, which has the lettering, should face down. Place the battery into the compartment, ensuring it sits correctly. The negative side without lettering should face you.

Reassembling the Key Fob

Once the new battery is securely in place, align the backing with the main part of the fob. Press the backing back into place until it snaps securely. Finally, reinsert the internal valet key.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Where to Buy the CR2032 Battery

You can purchase the CR2032 coin battery from various retailers or in online sotres.

Common Issues and Troubleshooting

Occasionally, you may encounter issues even after replacing the battery. Here are some common problems and solutions:

  • Key fob not working: Ensure the battery is correctly installed.
  • Loose battery: Check if the battery is securely placed.
  • Damaged fob: Inspect for any visible damage.

Maintaining Your Key Fob

Regular maintenance of your key fob can extend its lifespan. Here are some tips:

  • Keep the fob dry.
  • Avoid dropping the fob.
  • Replace the battery annually.

FAQ

What type of battery does the Ford Taurus key fob use?

The Ford Taurus key fob uses a CR2032 coin battery.

How often should I replace the key fob battery?

It is recommended to replace the battery annually or when the fob shows signs of low power.

Where can I buy a replacement battery?

You can purchase the CR2032 coin battery from Amazon.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

What should I do if the key fob still doesn’t work after replacing the battery?

Ensure the battery is installed correctly. If the issue persists, inspect the fob for damage or consult a professional.

Conclusion

Replacing the battery in your Ford Taurus key fob is a simple process that can save you time and money. By following this guide, you can ensure your key fob is always ready to use. For more information and detailed guides, visit the official website.

Remember to handle your key fob with care and perform regular maintenance to keep it in good working condition. Happy driving!

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.