How to Replace the Battery in a Hyundai Accent Key Fob

Introduction

In this guide, I’ll walk you through the steps to replace the battery in your Hyundai Accent key fob. This process applies to models from 2006 to 2017. The key fob typically has two buttons, and it uses a CR2032 coin battery.

Replacing the battery is straightforward and inexpensive. You won’t need any special tools, just a flathead screwdriver and a new CR2032 battery. Let’s get started on how to do it.

Step-by-Step Instructions

Tools and Materials Needed

• Flathead screwdriver
• CR2032 battery

Step 1: Locate the Groove

The first step involves finding the groove on the top of your key fob. This groove is designed to help you open the key fob easily.

Take a flathead screwdriver and insert it into this groove. Use a twisting motion to separate the two halves of the key fob.

Step 2: Open the Key Fob

As you twist the screwdriver, the key fob will start to open up. Be cautious while doing this, as the buttons inside might fall out.

Once open, you’ll see the battery housed inside. Even if your key fob looks slightly different, the process remains the same.

Step 3: Remove the Old Battery

Using the flathead screwdriver, push on the bottom edge of the battery. This will help it slide out through the wider area.

Finish removing the battery with your fingers. The battery type you’ll see is a CR2032 coin battery.

Step 4: Insert the New Battery

When you have your new CR2032 battery, make sure the positive side (with the text) is facing up.

Insert it the same way you removed the old one, ensuring it fits snugly into place.

Step 5: Reassemble the Key Fob

If the key fob came apart during the process, start by placing the rubber piece back into its position.

Next, place the circuit board on top of the rubber piece. Ensure that the button holes are aligned correctly.

The buttons should click into place when aligned properly. Finally, place the two halves of the key fob together and press until they click back into place.

Step 6: Test the Key Fob

Close the key fob and press the buttons to check if the light comes on. If everything is aligned correctly, the light should illuminate.

If it doesn’t, you may need to reopen the key fob and ensure all components are properly aligned.

Conclusion

Replacing the battery in your Hyundai Accent key fob is a simple task that can save you time and money. With just a few tools and a new battery, your key fob will be as good as new.

Always make sure to handle the key fob components carefully to avoid any damage. Now you can enjoy the convenience of a fully functional key fob once again.

Frequently Asked Questions

What type of battery does the Hyundai Accent key fob use?

The Hyundai Accent key fob uses a CR2032 coin battery.

Do I need any special tools to replace the battery?

No, you only need a flathead screwdriver and a new CR2032 battery.

How often should I replace the key fob battery?

It’s recommended to replace the battery every 1-2 years, or when the key fob starts to show signs of low battery.

What should I do if the key fob doesn’t work after replacing the battery?

Double-check that the battery is inserted correctly with the positive side facing up. Ensure all components are properly aligned and try again.

Can I use any brand of CR2032 battery?

Yes, any reputable brand of CR2032 battery will work for your key fob.

Is it possible to damage the key fob while replacing the battery?

As long as you handle the components carefully and follow the instructions, there’s minimal risk of damage.

Where can I buy a CR2032 battery?

You can purchase CR2032 batteries online, at electronics stores, or in the battery section of most supermarkets.

With these steps and tips, you should have no trouble replacing the battery in your Hyundai Accent key fob. Enjoy the convenience of a fully functional key fob without the need for professional assistance.