How to Replace the Battery in a Hyundai Elantra Touring Key Fob (2010 – 2014)

Introduction

Replacing the battery in your Hyundai Elantra Touring key fob is a straightforward process. This guide will take you through each step, ensuring you can do it yourself at home with minimal effort. The key fob for the 2010-2014 models uses a CR2032 battery, which is widely available and inexpensive.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools Needed

Before starting, make sure you have the following tools:

  • Flathead screwdriver
  • CR2032 battery

You can purchase the CR2032 battery from various online retailers, including Amazon. The precision screwdrivers are also available online.

Step-by-Step Guide

Locate the Notch

First, examine the top of the key fob. You will find a small notch or groove. This is where you will insert your flathead screwdriver.

Separate the Key Fob Halves

Insert the flathead screwdriver into the notch and twist gently. This action will separate the two plastic halves of the key fob.

Remove the Old Battery

Once the key fob is open, you will see the CR2032 battery. Use the flathead screwdriver to push on the bottom of the battery. Then, pull it out with your fingers from the top.

Insert the New Battery

Take your new CR2032 battery. Ensure the positive side, which has the text and information, is facing up. Slide it into the battery slot and push it down until it fits snugly.

Reassemble the Key Fob

If any buttons fell out during the process, don’t worry. Simply place the circuit board to one side. The buttons fit easily back into place. Align everything correctly before putting the circuit board back on top.

Close the Key Fob

Reattach the two halves of the key fob. Ensure everything is flush and properly aligned. Once reassembled, check if the light on the key fob is on. If it is, you have successfully replaced the battery.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

Replacing the battery in your Hyundai Elantra Touring key fob is a simple task that you can accomplish at home. This guide has walked you through the process step-by-step. Save yourself a trip to the dealership and enjoy the convenience of doing it yourself.

FAQs

What type of battery does the key fob use?

The key fob uses a CR2032 battery.

Where can I buy the CR2032 battery?

You can purchase the CR2032 battery from various online retailers, including Amazon.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

What tools do I need to replace the battery?

You will need a flathead screwdriver and a new CR2032 battery.

Is it difficult to replace the battery?

No, the process is straightforward and can be done at home.

What if the buttons fall out?

Simply place the circuit board to one side and fit the buttons back into place. They fit easily and align correctly.

How do I know if I have successfully replaced the battery?

If the light on the key fob is on after reassembly, you have successfully replaced the battery.

Additional Tips

Here are some additional tips to make the process even smoother:

  • Work on a clean, flat surface.
  • Keep small parts in a dish to avoid losing them.
  • Take your time to ensure proper alignment.

Why Replace the Battery Yourself?

Replacing the battery yourself has several advantages:

  • Cost-effective
  • Convenient
  • Quick process

By following this guide, you can save money and time by avoiding a trip to the dealership.

Final Thoughts

Maintaining your key fob by replacing its battery ensures it functions correctly. This small task can make a big difference in your daily routine. The process is simple and requires minimal tools, making it accessible for anyone to do at home.

Resources

For more detailed guides and resources, you can visit this link. There, you will find comprehensive information on maintaining various key fobs.

Thank You

Thank you for reading. I hope this guide has been helpful. Happy DIY battery replacing!

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.