Introduction to Key Fob Battery Replacement
Replacing the battery in your Kia Forte key fob is a simple task that can save you time and money. In this guide, I will walk you through the steps to change the internal battery of the key fob. This process is applicable to models from 2019 to 2021.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools You Will Need
Before we start, you’ll need a few tools:
- Flathead screwdriver
- Precision screwdriver
- A new CR2032 battery
If you don’t have a precision screwdriver, you can purchase a set on Amazon.com.
Step-by-Step Battery Replacement Guide
Step 1: Flip Out the Key
First, flip out the key from the fob. This will give you access to the internal components.
Step 2: Locate the Seam
Next, look at the back of the device where the key was. Inside this area, you’ll see a seam in the plastic. This is where you’ll insert your flathead screwdriver.
Step 3: Insert the Screwdriver
Insert the flathead screwdriver into the seam. Wiggle it until it gets stuck, then push deeper and pry until you hear a snap. You can then pull the back off with your fingers.
Step 4: Remove the Screws
Using a precision screwdriver, remove the small screws that secure the internal plastic piece. Set the screws aside carefully.
Step 5: Lift the Plastic Piece
Once the screws are out, lift the plastic piece to reveal the CR2032 battery underneath. Set the plastic piece aside.
Step 6: Pry Out the Old Battery
Use a small tool, like a screwdriver or toothpick, to pry the old battery out. Insert the tool into the small space at the top of the battery and lift it out.
Step 7: Insert the New Battery
Take a new CR2032 battery and place it positive side up. Slide it in from the top down, ensuring it clicks into place securely.
Step 8: Reassemble the Key Fob
Reattach the plastic piece by screwing it back in. Make sure the screws are not at an angle to avoid damaging the threads. Finally, click the back cover into place and insert the key back into the fob.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Common Mistakes to Avoid
While the process is straightforward, there are a few common mistakes to avoid:
- Using the wrong screwdriver
- Forgetting to secure screws
- Inserting the battery incorrectly
Make sure to follow each step carefully to ensure a successful battery replacement.
Why Regular Maintenance is Important
Regularly checking and replacing your key fob battery is crucial. A dead battery can leave you stranded, and replacing it ahead of time can prevent this inconvenience.
Additional Resources
For more information on how to change batteries for other makes and models, visit FobBattery.com.
FAQs
What type of battery does the Kia Forte key fob use?
The Kia Forte key fob uses a CR2032 coin battery.
How often should I replace the key fob battery?
It’s recommended to replace the battery every 1-2 years or when you notice a decrease in range.
Can I use a different type of battery?
No, it’s best to use a CR2032 battery to ensure compatibility and proper function.
Where can I buy replacement batteries?
You can buy replacement CR2032 batteries from various online retailers like Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
What if my key fob still doesn’t work after replacing the battery?
If your key fob doesn’t work after replacing the battery, check the orientation of the battery. If it’s correct, you may need to consult a professional for further diagnosis.
Conclusion
Replacing the battery in your Kia Forte key fob is a quick and easy process. By following these steps, you can ensure your key fob remains functional and reliable. For any additional information, feel free to visit FobBattery.com or check out more of our guides and videos.