How to Replace the Battery in a Mazda MX-5 Miata Flip Key Fob (2006 – 2015)

Introduction

Replacing the battery in your Mazda MX-5 Miata flip key fob is a straightforward process. In this guide, I will walk you through each step to ensure your key fob is functional again. The battery required for this task is a CR1620 coin battery. Let’s get started!

Sale
Panasonic CR1620 3.0 Volt Long Lasting Lithium Coin Cell Batteries in Child Resistant, Standards Based Packaging, 4-Battery Pack
  • LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
  • CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
  • LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored

Tools and Materials Needed

Before you begin, gather the necessary tools and materials. This will make the process smoother and quicker.

  • CR1620 coin battery
  • Flathead screwdriver
  • Precision screwdriver

You can purchase a CR1620 coin battery from Amazon.com.

Step-by-Step Guide to Replacing the Battery

Step 1: Open the Key Fob

First, locate the separation between the plastic pieces of the key fob. This is usually where the key folds inside. Use a flathead screwdriver to gently pry apart the plastic pieces. Hold the top part securely and push up to create separation.

Step 2: Remove the Old Battery

Once the key fob is open, you’ll see the CR1620 battery inside. It is held securely in place, so you’ll need a precision screwdriver to remove it. Insert the precision screwdriver into the bottom right corner, where there is a small arrow. Push the tool down and rock it back and forth until the battery pops out.

Step 3: Insert the New Battery

Take your new CR1620 battery and ensure the side with the brand and battery information faces down. Slide the battery into the top part first, aligning it with the metal contacts. Then, push the bottom part into place until it clicks securely.

Step 4: Reassemble the Key Fob

With the new battery in place, reattach the plastic cover. Make sure everything lines up correctly and clicks back together securely. Your key fob should now be fully functional with a fresh battery.

Sale
Panasonic CR1620 3.0 Volt Long Lasting Lithium Coin Cell Batteries in Child Resistant, Standards Based Packaging, 4-Battery Pack
  • LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
  • CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
  • LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored

Frequently Asked Questions

What type of battery does the Mazda MX-5 Miata key fob use?

The Mazda MX-5 Miata key fob uses a CR1620 coin battery.

How often should I replace my key fob battery?

Typically, a key fob battery should be replaced every 1-2 years, depending on usage.

Do I need any special tools to replace the battery?

A flathead screwdriver and a precision screwdriver are helpful tools for this task. You can also use a pen or another thin object if you don’t have a precision screwdriver.

Can I use a different type of battery?

It’s recommended to use the CR1620 battery as specified. Using a different type of battery may not fit properly or provide the necessary power.

Where can I buy a CR1620 battery?

You can purchase a CR1620 battery from various online retailers, including Amazon.

Sale
Panasonic CR1620 3.0 Volt Long Lasting Lithium Coin Cell Batteries in Child Resistant, Standards Based Packaging, 4-Battery Pack
  • LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
  • CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These Panasonic CR1620 batteries and packaging meet or exceed IEC 60086-4, ANSI c18-3m part 2, and UL 1642 compliance standards
  • LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored

Conclusion

Replacing the battery in your Mazda MX-5 Miata flip key fob is a simple task that can save you time and money. By following these steps, you can ensure your key fob remains in good working condition. For more detailed guides and tools, visit this website. Happy driving!

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.