How to Replace the Battery in Your Chevrolet Suburban Key Fob (2007-2014)

Introduction

Replacing the battery in your Chevrolet Suburban key fob is a straightforward task that you can easily do at home. You don’t need to visit a dealership for this. In this guide, I’ll walk you through the steps to replace the battery in your key fob.

All you’ll need is a regular flathead screwdriver and a CR2032 battery.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

  • Flathead screwdriver
  • CR2032 battery

Identifying Your Key Fob

There are a few versions of the Chevrolet Suburban key fob. The classic version features a triangular button at the top. Regardless of the version you have, the process to open them and the battery inside are the same.

Whether you have the four-button, five-button, or six-button layout, the procedure remains identical. You can follow these instructions for any of these versions.

Step-by-Step Instructions

Step 1: Locate the Slot

First, grab your flathead screwdriver. Look at the bottom right of your key fob, next to where the keyring attaches. You’ll see a small slot or opening. This is where you’ll insert your flathead screwdriver.

Step 2: Insert and Twist the Screwdriver

Insert the flathead screwdriver into the slot. Wiggle it in there until it’s securely in place. Once it’s in, give it a little twist, just like you would turn a key. The key fob should start to open up.

Step 3: Open the Key Fob

After twisting the screwdriver, you can pull the key fob apart. This will give you access to the battery inside.

Step 4: Remove the Circuit Board

The easiest way to proceed from here is to lift the circuit board up and out of the key fob. This will allow you to slide the battery out easily.

Step 5: Remove the Old Battery

You can pull the battery out with your fingers or use the flathead screwdriver to get under it and push it out. Dispose of the old battery properly.

Step 6: Insert the New Battery

Take your new CR2032 battery and ensure the positive side is facing up. Slide the new battery into place with the plus sign facing up.

Step 7: Reassemble the Key Fob

Place the circuit board back into the front part of the key fob, ensuring the battery is facing up. Push it down so it sits flat. Then, grab the back of the key fob, line it up, and squeeze it together.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

And just like that, you have successfully replaced the battery in your Chevrolet Suburban key fob. I hope you found this guide helpful and easy to follow.

If you have any questions or need help with other key fob models, feel free to leave a comment or visit our website at FobBattery.com. We’ve got tutorials for almost every make and model out there.

FAQ

What type of battery do I need?

You need a CR2032 battery for the Chevrolet Suburban key fob.

Do I need any special tools?

No, you only need a regular flathead screwdriver to open the key fob.

Can I damage the key fob by doing this?

As long as you follow the instructions carefully, you should not damage the key fob. Be gentle when inserting and twisting the screwdriver.

How often should I replace the battery?

The battery life can vary, but it’s generally a good idea to replace it every 1-2 years, or when you notice the key fob is not working as well as it used to.

Where can I buy the battery?

You can purchase the CR2032 battery from various retailers, including Amazon.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Is it necessary to visit a dealership?

No, you can easily replace the battery at home using this guide. There’s no need to visit a dealership.

What if my key fob still doesn’t work?

If your key fob doesn’t work after replacing the battery, there might be a different issue. Consider consulting a professional for further diagnosis.

Can this method be used for other models?

This guide is specific to the Chevrolet Suburban, but many key fobs use similar methods for battery replacement. Always check your specific model’s instructions.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.