How to Replace the Battery in Your GMC Yukon Key Fob (1997 – 2006)

Introduction

Replacing the battery in your GMC Yukon key fob is a straightforward process that can save you both time and money. In this guide, I will walk you through each step to ensure you can do it yourself at home.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Required Tools and Materials

Before you begin, make sure you have the necessary tools and materials on hand. This will make the process smoother and quicker.

  • CR2032 battery
  • Coin or flathead screwdriver

If you don’t have a CR2032 battery, you can easily purchase one from Amazon.com.

Step-by-Step Instructions

Follow these steps to replace the battery in your GMC Yukon key fob:

1. Locate the Indentation

First, look at the bottom of your key fob. You will see a large indentation in the plastic. This is where you will insert your tool.

2. Insert the Coin or Screwdriver

Take your coin or flathead screwdriver and insert it into the indentation. Twist it to crack open the key fob. This will give you access to the battery inside.

3. Remove the Old Battery

Use your fingernail to get under the battery and pull it up. If this is difficult, you can use a flathead screwdriver, pen, pencil, or even a car key to pry it up.

4. Insert the New Battery

Take your new CR2032 battery and ensure the positive side (marked with a plus sign) is facing down. Snap it into place by pushing it down gently.

5. Reassemble the Key Fob

Once the new battery is in place, reattach the two halves of the key fob. Squeeze them together until they click back into place.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Benefits of DIY Battery Replacement

Replacing your key fob battery yourself offers several benefits:

  • Cost savings
  • Time efficiency
  • Convenience

By following these simple steps, you can avoid a trip to the dealership and get your key fob working again in minutes.

Common Issues and Troubleshooting

While the process is generally straightforward, you might encounter some common issues:

  • Difficulty opening the key fob
  • Trouble removing the old battery
  • New battery not fitting properly

If you face any of these problems, double-check that you are using the right tools and battery type. For more detailed instructions, visit FobBattery.

Related Resources

If you have other GMC models or need more detailed guides, you can find comprehensive resources at GMC Acadia Key Fob Battery Replacement (2007 – 2017) – FobBattery.

Frequently Asked Questions (FAQ)

What type of battery does the GMC Yukon key fob use?

The GMC Yukon key fob uses a CR2032 battery.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

How long does the new battery last?

A new CR2032 battery should last for several years under normal usage conditions.

Do I need any special tools to replace the battery?

No, you only need a coin or a flathead screwdriver.

Can I use any brand of CR2032 battery?

Yes, any reputable brand should work fine.

What should I do if my key fob still doesn’t work after replacing the battery?

Ensure the battery is installed correctly with the positive side facing down. If the issue persists, consult your vehicle’s manual or seek professional help.

Conclusion

Replacing the battery in your GMC Yukon key fob is a simple task that can be completed in under five minutes. By following the steps outlined in this guide, you can save money and get your key fob working like new. For more information and detailed guides, visit FobBattery.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.