Hyundai Elantra Key Fob Battery Replacement Guide (2014 – 2020)

Introduction to Key Fob Battery Replacement

Replacing the battery in your Hyundai Elantra key fob is a simple task that you can do at home. This guide will walk you through the process step-by-step. The key fob model discussed here is used in Hyundai Elantra vehicles from 2014 to 2020.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

Before starting, gather the necessary tools and materials. You will need a CR2032 coin battery and a precision screwdriver. These items are inexpensive and readily available.

  • CR2032 coin battery
  • Precision screwdriver

For convenience, you can purchase the CR2032 battery on Amazon.com.

Step-by-Step Battery Replacement Process

Follow these steps to replace the battery in your Hyundai Elantra key fob:

1. Remove the Internal Key

First, locate the button at the bottom of the key fob. Press this button and remove the internal key.

2. Open the Key Fob

Next, find the small groove near the hole where the key was removed. Insert a flathead screwdriver into this groove. Apply a little pressure and twist to create separation between the two halves of the key fob.

You can now use your fingers or continue twisting the screwdriver to fully open the key fob.

3. Remove the Old Battery

Inside the key fob, you will find the CR2032 battery. It is housed snugly, so you may need a precision screwdriver to remove it. Insert the tool into the top corner of the battery and apply a bit of pressure to pop it out.

4. Insert the New Battery

Take the new CR2032 battery and ensure the positive side (the side with the text) is facing down. Align it with the metal component inside the key fob and push it into place.

5. Reassemble the Key Fob

Make sure the circuit board inside the key fob is properly positioned and not moving around. Place the two halves of the key fob back together and click them into place.

6. Return the Internal Key

Finally, reinsert the internal key into the key fob. Ensure it clicks securely into place.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

Congratulations! You have successfully replaced the battery in your Hyundai Elantra key fob. This straightforward process can save you time and money compared to visiting a dealership.

Frequently Asked Questions (FAQ)

What type of battery does the Hyundai Elantra key fob use?

The Hyundai Elantra key fob uses a CR2032 coin battery.

Do I need any special tools to replace the battery?

Yes, you will need a precision screwdriver to safely remove and replace the battery.

How often should I replace the key fob battery?

On average, a key fob battery lasts 1-2 years. Replace it when the key fob starts to function intermittently or stops working.

Can I damage the key fob if I replace the battery myself?

If you follow the steps carefully and use the right tools, you should not damage the key fob. However, be gentle when prying it open to avoid breaking the plastic casing.

Is it necessary to reprogram the key fob after replacing the battery?

No, replacing the battery does not affect the programming of the key fob. It should work as usual once the new battery is installed.

What should I do if the key fob still doesn’t work after replacing the battery?

If the key fob doesn’t work after replacing the battery, check to ensure the battery is properly installed. If it still doesn’t work, the key fob may have other issues that require professional attention.

Can I use any CR2032 battery for my key fob?

Yes, any standard CR2032 coin battery should work for your key fob. However, it is recommended to use a high-quality battery from a reputable brand to ensure longevity.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery on Amazon.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.