Hyundai Veloster Key Fob Battery Replacement Guide (2012 – 2017)

Introduction

Replacing the battery in your Hyundai Veloster key fob is a simple task that you can easily do at home. In this guide, I will walk you through the steps to change the internal battery in your key fob. This key fob is used in Hyundai Veloster models from 2012 to 2017 and requires a CR2032 battery.

Tools and Materials Needed

Before starting, ensure you have the necessary tools and materials. You will need:

• Flathead screwdriver
• CR2032 battery
• Precision screwdriver (optional)

You can purchase a pack of CR2032 batteries online for just a few dollars. Buy Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery for a reliable option.

Step-by-Step Battery Replacement

Follow these steps to replace the battery in your Hyundai Veloster key fob:

Step 1: Remove the Internal Key

First, locate the button on the bottom of the key fob. Press this button to remove the internal key. This will reveal the slot beneath it, which you will use to open the key fob.

Step 2: Open the Key Fob

Insert your flathead screwdriver into the slot above the keyhole. Holding the screwdriver firmly, twist it gently. With a bit of pressure, the two halves of the key fob will start to separate. You can then pull them apart with your fingers or continue using the screwdriver to work your way down, twisting until the key fob is completely open.

Step 3: Remove the Old Battery

The battery is housed in a small compartment inside the key fob. You might find it difficult to remove the battery with your fingers. If you have a smaller screwdriver, you can use it to pry the battery out. Alternatively, a precision screwdriver can safely remove the battery without causing any damage. Insert the precision screwdriver on the right side of the battery, push it down to the floor of the compartment, and pry the battery out.

Step 4: Insert the New Battery

Take a new CR2032 battery and ensure the positive side is facing down. Position the battery into the compartment, starting from the metal component side, and click it into place. The battery should fit snugly, and you’ll know it’s correctly positioned when it clicks into place.

Step 5: Reassemble the Key Fob

Once the new battery is in place, click the two halves of the key fob back together. Insert the internal key back into its slot. You should see the light on the key fob come on, indicating that the battery has power and the key fob is working correctly.

Additional Tips

Here are some additional tips to ensure a smooth battery replacement process:

• Use a toothpick or pen if you don’t have a precision screwdriver.
• Be gentle to avoid damaging the key fob components.
• Purchase a pack of precision screwdrivers if you frequently need to replace batteries or work on small electronics.

Conclusion

Replacing the battery in your Hyundai Veloster key fob is a quick and easy process that can save you time and money. With just a few simple tools and a new CR2032 battery, you can have your key fob working like new in no time.

If you found this guide helpful, feel free to leave a like and share it with others who might benefit from it. For more detailed information, visit Fob Battery.

Frequently Asked Questions (FAQ)

What type of battery does the Hyundai Veloster key fob use?

The Hyundai Veloster key fob uses a CR2032 battery.

Can I use any brand of CR2032 battery?

Yes, any brand of CR2032 battery will work. However, it’s recommended to use a reliable brand for longer battery life. Buy Amazon Basics CR2032 batteries for a dependable option.

Do I need any special tools to replace the battery?

You only need a flathead screwdriver and a new CR2032 battery. A precision screwdriver can also be helpful but is not necessary.

How often should I replace the key fob battery?

Typically, the battery should be replaced every 1-2 years, depending on usage. If the key fob starts to work intermittently or stops working altogether, it’s time to replace the battery.

Is it safe to replace the battery myself?

Yes, replacing the battery yourself is safe and straightforward. Just follow the steps outlined in this guide to ensure you do it correctly.

Where can I buy a CR2032 battery?

You can purchase CR2032 batteries online or at local stores.

What should I do if the key fob still doesn’t work after replacing the battery?

If the key fob doesn’t work after replacing the battery, ensure the battery is correctly installed and the key fob is properly reassembled. If it still doesn’t work, there may be an issue with the key fob itself, and you might need to consult a professional.

Can I use a different type of battery?

No, it’s essential to use a CR2032 battery, as other types may not fit or provide the correct voltage.