Kia Sorento Key Fob Battery Replacement Guide (2013 – 2020)

Introduction

Replacing the battery in your Kia Sorento key fob is a simple task that can save you time and money. If your Sorento was manufactured between 2013 and 2020, this guide will show you how to replace the internal battery using a CR2032 coin battery.

Required Tools and Materials

Before you start, ensure you have the necessary tools and materials. You will need a CR2032 battery and possibly a flathead screwdriver or a similar tool to help pry open the key fob.

• CR2032 battery
• Flathead screwdriver
• Optional: Coin or another key

You can easily purchase the required CR2032 batteries on Amazon.

Step-by-Step Battery Replacement

Step 1: Remove the Key

To begin, press the button on your key fob to remove the physical key. This will expose a small lip where you will need to apply pressure.

Step 2: Open the Key Fob

Next, use your thumb to push up on the exposed lip while holding the top section of the key fob steady. If this is difficult, you can use a flathead screwdriver, another key, or even a coin to pry it open. Insert the tool into the gap and gently twist to separate the back section of the plastic housing.

Step 3: Remove the Old Battery

With the back section removed, you will see the old CR2032 battery. Use a flathead screwdriver or a similar tool to gently pry the battery out. Insert the tool at the bottom edge of the battery and lift it out carefully.

Step 4: Insert the New Battery

Take your new CR2032 battery and insert it into the key fob with the positive side facing up. Slide it under the two plastic tabs at the top first, then press the bottom into place until it clicks.

Step 5: Reassemble the Key Fob

Finally, reattach the back section of the key fob. Press it firmly until it clicks back into place. Your key fob should now be working with the new battery.

Tips and Troubleshooting

If you encounter any issues during the battery replacement process, here are some tips to help you:

• Ensure the new battery is inserted correctly with the positive side facing up.
• Make sure the back section is securely clicked into place.
• If the key fob still doesn’t work, try using another new battery.

For more detailed guides and troubleshooting, visit fobbattery.com.

FAQs

What type of battery does the Kia Sorento key fob use?

The Kia Sorento key fob uses a CR2032 coin battery.

How often should I replace the key fob battery?

Generally, the key fob battery should be replaced every 1-2 years, depending on usage.

Can I use a different type of battery?

No, it is recommended to use a CR2032 battery as specified by the manufacturer for optimal performance.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery on Amazon.

What should I do if the key fob still doesn’t work after replacing the battery?

If the key fob still doesn’t work, double-check that the battery is installed correctly. If it is, try using another new battery. If the problem persists, there may be an issue with the key fob itself, and you may need to consult a professional.

Conclusion

Replacing the battery in your Kia Sorento key fob is a quick and easy task that can be done at home with minimal tools. By following this guide, you can ensure your key fob continues to function properly, saving you from potential inconvenience. Always remember to use the correct battery type and handle the key fob components with care.

For more helpful guides and tutorials, visit fobbattery.com.