Introduction
Replacing the battery in your Nissan Leaf key fob is a simple task you can do at home. You don’t need to visit a dealership. All you need is a flathead screwdriver and a CR2032 battery.
In this guide, I’ll walk you through the process step-by-step. You’ll save money and time by doing it yourself.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Gather Your Tools
Before you start, make sure you have the necessary tools:
- Flathead screwdriver
- CR2032 battery
You can find CR2032 batteries online for just a few dollars. I’ve included a link to Amazon where you can purchase them at a great price.
Identifying Your Key Fob
The Nissan Leaf key fob comes in two versions: a three-button and a four-button model. Both versions use the same battery and the replacement process is identical.
Step 1: Remove the Internal Key
First, locate the small lever on the back of the key fob. Hold it down and pull out the internal key.
Step 2: Open the Key Fob
Next, grab your flathead screwdriver. Look at the bottom of the key fob where you removed the internal key. On the right side, you’ll see a small opening.
Insert the screwdriver into the opening and twist gently. This will pop the key fob open. If your screwdriver is too large, consider using a precision screwdriver set.
Step 3: Remove the Old Battery
Once the key fob is open, use the same screwdriver to gently lift and pry out the old battery.
Step 4: Insert the New Battery
Take your new CR2032 battery. Ensure the positive side, marked with a plus sign, faces down. Push it into place.
Step 5: Reassemble the Key Fob
Line up the two halves of the key fob and squeeze them together until they snap into place. Reinsert the internal key.
That’s it! Your key fob is now ready to use.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Why Do It Yourself?
By replacing the battery yourself, you avoid the high costs charged by dealerships. The process is quick, easy, and only requires a small investment in tools and the battery.
Additional Tips
- Keep a spare CR2032 battery at home.
- Check the battery annually.
- Keep your tools handy.
FAQs
What type of battery do I need?
You need a CR2032 battery for your Nissan Leaf key fob.
Where can I buy the battery?
You can purchase CR2032 batteries online, at electronics stores, or at automotive stores.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Can I use any flathead screwdriver?
Yes, but a precision screwdriver set may make the process easier.
Is this process the same for all Nissan Leaf models?
Yes, this process applies to Nissan Leaf models from 2011 to 2020.
How often should I replace the battery?
Check the battery annually and replace it when it starts to weaken.
What if my key fob still doesn’t work?
If your key fob doesn’t work after replacing the battery, check the battery orientation and ensure it’s properly seated.
Conclusion
Replacing the battery in your Nissan Leaf key fob is a straightforward process. With a flathead screwdriver and a CR2032 battery, you can do it yourself in minutes.
Save money and time by following this guide. If you have any questions or need further assistance, feel free to reach out.