Toyota Camry Key Fob Battery Replacement (2012 – 2017)

Introduction to Key Fob Battery Replacement

Replacing the battery in your Toyota Camry key fob is a simple task that you can perform at home. This guide will walk you through the process step-by-step, ensuring that you can do it quickly and efficiently.

All you need is a flathead screwdriver and a CR2032 coin battery. These batteries are readily available online, and you can find a link to purchase them in the description. Let’s get started!

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

  • Flathead screwdriver
  • CR2032 coin battery

Step-by-Step Guide to Replacing the Battery

Step 1: Remove the Internal Key

Look for a small button on the side of the key fob that says “Push.” Hold this button down and pull on the key to remove it. Set the key aside for now.

Step 2: Open the Key Fob

With the key removed, you’ll notice a keyhole and a small slot in the plastic perpendicular to it. Insert your flathead screwdriver into this slot.

Hold the key fob loosely and twist the screwdriver to open the back piece of plastic. Remove this plastic piece and set it aside.

Step 3: Remove the Old Battery

Using the same flathead screwdriver, gently get between the battery and the plastic behind it. Wiggle or twist the screwdriver to loosen the battery. Be careful not to use too much force to avoid damaging the key fob.

Once the battery is loose, remove it and dispose of it properly.

Step 4: Insert the New Battery

Take your new CR2032 battery and ensure the positive side is facing up. You should see a little plus sign on the battery. Click the battery back into place.

Step 5: Reassemble the Key Fob

Snap the back piece of plastic onto the key fob. Make sure it clicks into place securely.

Reinsert the internal key by sliding it back into its slot until it clicks.

Step 6: Test the Key Fob

Press any button on the key fob to check if the little light comes on. If it does, your battery replacement was successful. Congratulations!

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tips for a Smooth Battery Replacement

  • Handle the key fob gently.
  • Use minimal force when prying open.
  • Ensure the new battery is oriented correctly.

Common Issues and Troubleshooting

Key Fob Won’t Open

If you’re having trouble opening the key fob, double-check that you’re inserting the screwdriver into the correct slot. Applying a bit of extra pressure might help, but be cautious not to break the plastic.

Battery Doesn’t Fit

Ensure you’re using a CR2032 battery. Other batteries might not fit properly or could damage the key fob.

Key Fob Doesn’t Work After Replacement

If the key fob doesn’t work after replacing the battery, ensure the battery is oriented correctly with the positive side facing up. Also, check if the battery is properly seated in its compartment.

Frequently Asked Questions (FAQ)

What tools do I need?

You’ll need a flathead screwdriver and a CR2032 coin battery.

Where can I buy the battery?

You can purchase the CR2032 battery online. There’s a link in the description to buy it on Amazon.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

How often should I replace the battery?

Typically, key fob batteries last 1-2 years. Replace it when you notice a decrease in range or if the key fob stops working.

Can I use a different type of battery?

No, it’s essential to use a CR2032 battery. Other types may not fit or function correctly.

What should I do with the old battery?

Dispose of the old battery properly. Many stores and recycling centers accept used batteries.

Will this guide work for other Toyota models?

This guide is specifically for Toyota Camry models from 2012 to 2017. However, the process may be similar for other models.

Conclusion

Replacing the battery in your Toyota Camry key fob is a straightforward process. With just a flathead screwdriver and a CR2032 battery, you can do it in minutes.

By following this guide, you can save time and money by avoiding a trip to the dealership. Plus, you’ll have the satisfaction of knowing you did it yourself.

Remember to handle the key fob gently and ensure the new battery is correctly oriented. If you encounter any issues, refer to the troubleshooting section for help.

Thank you for following along. I hope this guide was helpful. If you have any questions or need further assistance, feel free to leave a comment or visit our website for more tutorials.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.