Introduction
Replacing the battery in your Nissan Titan key fob is a simple task. Whether you have the three-button or the four-button version, the process is the same. In this guide, I will walk you through the steps to replace the battery in your key fob.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before we start, make sure you have the following tools and materials:
- Flathead screwdriver (small size)
- CR2032 battery
You can purchase the CR2032 battery online. Check out the first link in the description for a great price on Amazon.
Step-by-Step Guide
Step 1: Remove the Internal Key
First, flip the key fob over and locate the small switch on the back. Hold down this switch while pulling out the internal key. This will give you access to the inside of the key fob.
Step 2: Open the Key Fob
Next, look at the bottom of the key fob. You will see an opening in the plastic. Insert your flathead screwdriver into this opening. Gently twist the screwdriver until you hear a click. This indicates that the key fob is starting to open.
Continue twisting gently until you can pull the key fob apart with your fingers. Be careful not to use too much force, as this could damage the key fob.
Step 3: Remove the Old Battery
Once the key fob is open, you will see the battery. Use the same flathead screwdriver to carefully pry the battery out. Insert the corner of the screwdriver under the battery and it will come right out.
Step 4: Insert the New Battery
Take your new CR2032 battery and make sure the positive side is facing down. Push the battery into place, ensuring it sits flat in the compartment. This is crucial for the key fob to function properly.
Step 5: Reassemble the Key Fob
Now, click the two pieces of the key fob back together. Make sure they are securely connected. You can then reinsert the internal key into its slot.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Congratulations! You have successfully replaced the battery in your Nissan Titan key fob. This simple task can save you time and money. If you found this guide helpful, feel free to drop a like or leave a comment. For more guides and tips, visit our website at fobbattery.com.
FAQs
What type of battery does the Nissan Titan key fob use?
The Nissan Titan key fob uses a CR2032 battery.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery on Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Can I use any flathead screwdriver to open the key fob?
It’s best to use a small-sized flathead screwdriver to avoid damaging the key fob.
How often should I replace the key fob battery?
Key fob batteries usually last 2-3 years. Replace the battery when the key fob starts to work intermittently.
What should I do if my key fob still doesn’t work after replacing the battery?
Ensure the battery is inserted correctly. If the problem persists, consult a professional.
Is it safe to open the key fob myself?
Yes, as long as you follow the steps carefully and use the right tools, it is safe to open the key fob yourself.
Can I use a different type of battery?
No, it is important to use a CR2032 battery to ensure compatibility and proper function.
Do I need to reprogram the key fob after replacing the battery?
No, replacing the battery does not require reprogramming the key fob.