Introduction
Replacing the battery in your Hyundai Genesis Sedan key fob is a simple task you can do at home. This guide will walk you through the process step by step. You will need a CR2032 battery, which you can easily purchase online.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before you start, gather the following tools and materials:
- CR2032 battery
- Flathead screwdriver
- Precision screwdriver
All these items are available on Amazon.
Step-by-Step Guide
Follow these steps to replace the battery in your Hyundai Genesis Sedan key fob:
Step 1: Remove the Internal Key
First, press the button on the key fob to remove the internal key. Set the key aside.
Step 2: Open the Key Fob
Look inside the slot where the key was. You will see a keyhole on one side and a small slot on the other. Insert a flathead screwdriver into the slot and twist to separate the two halves of the key fob.
Step 3: Remove the Old Battery
Once the key fob is open, locate the battery housed in a small compartment. Use a precision screwdriver to carefully remove the old battery. Insert the screwdriver into a small area, such as the top right corner, to gently lift the battery out.
Step 4: Insert the New Battery
Take your new CR2032 battery and ensure the positive side (the side with the text) is facing down. Insert the battery by pushing it towards the bottom of the metal component first, then press the top into place.
Step 5: Reassemble the Key Fob
Before closing the key fob, ensure the circuit board is properly positioned. Align the thinner side of the board with the bottom of the rubber holder. Once everything is in place, snap the two halves of the key fob back together and reinsert the internal key.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Common Issues and Troubleshooting
If your key fob doesn’t work after replacing the battery, consider these troubleshooting tips:
- Check battery orientation
- Ensure circuit board is properly seated
- Verify battery is new and functional
Where to Buy Replacement Batteries
You can purchase the CR2032 battery and precision screwdrivers from Amazon. Buying online is convenient and ensures you get the right tools for the job.
FAQ
What type of battery does the Hyundai Genesis key fob use?
The Hyundai Genesis key fob uses a CR2032 battery.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
How often should I replace the key fob battery?
Typically, the battery should be replaced every 2-3 years or when you notice a decrease in range.
Can I use a different type of battery?
No, you should only use a CR2032 battery to ensure proper functionality.
Is it safe to replace the battery myself?
Yes, replacing the battery is safe and straightforward if you follow the steps carefully.
Where can I find more information?
For more details, visit this guide on the Hyundai Genesis key fob.
Conclusion
Changing the battery in your Hyundai Genesis Sedan key fob is simple and cost-effective. With the right tools and a little patience, you can have your key fob working like new in no time. Don’t forget to check out the recommended products on Amazon for all your key fob needs.