Has your key fob battery died? Do you need help replacing it? You’ve come to the right place! Your Dodge Durango key fob battery replacement shouldn’t cost you a fortune at the dealership with these step-by-step guides shown below.
However, you don’t always have to wait till your Dodge key fobs stop working completely before you learn how to replace the battery. Follow the resources in this blog for a seamless Dodge Durango key replacement!
For other Dodge models, see our Dodge key fob battery page.
How to Replace the Dodge Durango “Rounded” Key Fob Battery (2014-2021)
Scroll down to see a full video tutorial or keep reading for a step-by-step guide on Dodge Durango key fob battery replacement.
What you will need:
1x CR2032 battery
Flat-head screwdriver
Step 1
The first step—pull the silver switch on the back of the device to pull out the internal key, also known as the emergency key.
Step 2
Next, locate the little slot at the bottom of the key fob, next to the keyhole (where the emergency key came out). Insert your flathead screwdriver into the slot and twist it gently. This action will separate the two halves of the device.
Step 3
Now, using your screwdriver, lift the old battery out of its housing. Be gentle!
Step 4
Time for a replacement. Take a new battery (CR2032) and click it into place with the positive side facing down.
Step 5
Finally, click the two halves of the device back together. Return the emergency key and you’re all good to go!
That was an easy Dodge Durango key fob replacement, wasn’t it?
Remember to test the new battery on your car to ensure it’s working.
How to Replace the Dodge Durango “Teardrop” Key Fob Battery (2011, 2012, 2013)
This is a smooth one. Scroll down to see a full video tutorial or keep reading for a step-by-step guide.
What you will need:
1x CR2032 battery
Flat-head screwdriver
Step 1
At the bottom of the device, you will notice a seam between the two halves of the key fob. Insert the corner of your flathead screwdriver into the seam, wiggling as you push. Once the tool is inside, twist until you hear a crack, and the two halves of the device pop open.
Step 2
Now, carefully remove the rubber component and use your finger or screwdriver to lift the battery out of its housing. Be gentle while doing this.
Step 3
The next thing is to slide in the new CR2032 battery and click it into place ensuring the positive side is facing down.
Step 4
The last thing is to set the rubber buttons back on top and click the front piece of plastic back into place.
That’s all it takes. You just changed the battery at home and saved yourself the cost and a trip to the dealership.
How to Replace the Dodge Durango “Fixed Key” Key Fob Battery (2004-2010)
Scroll down to see a full video tutorial or keep reading for a step-by-step guide on Dodge Durango key fob battery replacement.
What you will need:
1x CR2032 battery
Flat-head screwdriver
Step 1
Locate the small indentation on the bottom-left side of the key fob. Take your flathead screwdriver and insert it into this slot. Turn the tool like a key and the two halves of the device will come apart. Set aside the cases without the battery.
Step 2
Next, carefully remove the rubber piece with the buttons on it.
Step 3
Now that you are inside, use your screwdriver to carefully remove the dead battery.
Step 4
Slide in your new CR2032 battery, and ensure it clicks into place with the positive side down.
Step 5
Finally, put the rubber piece back in place and click the face of the device back on.
You just performed a successful Dodge Durango key fob battery replacement. Excellent work!
Remember to unlock and lock your car door to test the new key fob battery.
How to replace the Dodge Durango “Pear-Shaped” Key Fob Battery (1999-2003)
Note that this type of key fob uses two CR2016 batteries. However, the battery replacement key fob process is still pretty easy. Scroll down to see a full video tutorial or keep reading for a step-by-step guide on Dodge Durango key fob battery replacement.
What you will need:
2x CR2016 battery
Flat-head screwdriver
Step 1
The first thing is to find the little opening on the bottom right side of the key fob. Can you see it? Good. Now, insert a flathead screwdriver into the slot and twist it to separate the device into two halves.
Step 2
You should have access to the batteries now. Next, use your fingernail or screwdriver to remove the first battery. To remove the second one, press down on one side so the other side comes up for easy pull-out.
Step 3
Fix the two new CR2016 batteries into place, one on top of the other. Ensure both positive sides are facing up.
Step 4
Lastly, click the two halves of the key fob back together. And you’re done!
Verify that your key fob is working: lock and unlock the vehicle doors. Did that work smoothly? Great job, there!
What kind of battery does a Dodge Durango key fob take?
A typical Dodge Durango takes a CR2032s battery which you’re guaranteed to find on Amazon. You’re also likely to find it in almost all automotive parts shops.
Do I need to reprogram my Dodge Durango key fobs after the old battery replacement?
There is no need for a dodge Durango key programming after a remote key fob battery change. However, there is an exception to this. If you replaced some internal electronics or wiring alongside the remote battery replacement, you will have to reprogram it.
Bottom Line
Now that you know replacing dodge Durango key fobs is pretty straightforward, go ahead and follow through the key fob replacement process provided above and enjoy your keyless entry again. Once that’s complete, remember to leave your comment below!
